mpma (divider) www.vishay.com vishay thin film revision: 03-dec-12 1 document number: 60113 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 matched pair, molded, automotive, thin film, sot-23, resistor, surface mount network, aec-q200 qualified vishay thin film mpma series dividers provide 2 ppm/c tracking and a ratio tolerance as tight as 0.05 %, small size, and exceptional stability for all surface mount applications. the standard sot-23 package format with unity and common standard resistance divider ratios provide easy selection for most applications requiring matched pair resistor el ements. mpma is aec-q200 qualified and ideal for hi gh precision automotive applications. the ratios listed are available for off the shelf delivery. if you require a no n-standard ratio, consult the applications engineering group as we may be able to meet your requirements. schematic features ? aec-q200 qualified ? resistance range 1 k ? to 50 k ? ? excellent long term rati o stability 0.08 % over 1000 h, 125 c ? ratio tolerances to 0.05 % ? low tcr tracking 2 ppm ? very low noise and voltage coefficient (< - 30 db, 0.1 ppm/v) ? standard jedec to-236 package variation ab ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 typical performance 3 12 r 1 r 2 absolute tracking tcr 25 2 absolute ratio tol. 0.1 0.05 standard divider ratio (r 2 /r 1 ) ratio r 2 ( ? )r 1 ( ? ) 50:1 50k 1k 25:1 25k 1k 20:1 20k 1k 10:1 10k 1k 9:1 9k 1k 6:1 6k 1k 5:1 10k 2k 5:1 5k 1k 4:1 8k 2k 4:1 4k 1k 2:1 10k 5k 2:1 2k 1k 1:1 50k 50k 1:1 25k 25k 1:1 10k 10k 1:1 5k 5k 1:1 2.5k 2.5k 1:1 1k 1k standard electrical specifications test specifications conditions material ta2n - pin/lead number 3- resistance range 1 k ? to 50 k ? per resistor - tcr: absolute 25 ppm/c - 55 c to + 125 c tcr: tracking 2 ppm/c (typical) - 55 c to + 125 c tolerance: absolute 0.1 % to 1.0 % + 25 c tolerance: ratio 0.05 % to 0.5 % + 25 c power rating: resistor 100 mw maximum at + 70 c power rating: package 200 mw maximum at + 70 c stability: absolute 0.3 % 1000 h at + 125 c stability: ratio 0.08 % 1000 h at + 125 c voltage coefficient 0.1 ppm/v - working voltage 100 v max. not to exceed - operating temperature range - 55 c to + 155 c - storage temperature range - 55 c to + 155 c - noise < - 30 db - thermal emf 0.2 v/c - shelf life stability: absolute ? r / r 0.01 % 1 year at + 25 c shelf life stability: ratio ? r / r 0.002 % 1 year at + 25 c p x r
mpma (divider) www.vishay.com vishay thin film revision: 03-dec-12 2 document number: 60113 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions and imprinting in inches and millimeters dimension inches millimeters min. max. min. max. a 0.031 0.040 0.79 1.02 a1 0.001 0.004 0.02 0.10 b 0.105 0.120 2.67 3.05 s 0.071 0.079 1.80 2.00 w 0.015 0.021 0.38 0.54 l 0.083 0.098 2.10 2.50 h 0.047 0.055 1.20 1.40 t 0.005 0.010 0.13 0.25 j 0.0035 0.0059 0.089 0.15 k 0.017 0.022 0.44 0.55 ?0808 h l w k s b a a1 t j ? pin # 1 2 3 mechanical specifications resistive element tantalum nitride substrate material ceramic body molded epoxy terminals copper alloy lead (pb)-free option solder free leads, ni/pd/au plated derating curve ambient temperat u re c 0 70 125 155 0 20 40 60 80 100 percent of rated power 100 % = 0.2 w environmental tests environmental test conditions suggested product limits abs/ratio max. values abs/ratio resistance temperature characteristics - 55 c to + 125 c 25/2 15/2 high temperature exposure mil-std-202, 108, 1000 h at 125 c 0.25 %/ 0.1 % 0.4 %/ 0.34 % temperature cycling jesd22, ja-104, 1000 cycles at - 55 c to + 125 c 0.25 %/ 0.1 % 0.1%/ 0.027 % moisture resistance mil-std-202, 106 0.25 %/ 0.1 % 0.03 %/ 0.012 % biased humidity mil-std-202, 103, 1000 h at 85 c, 85 % rh, 10 % p 1.0 %/ 0.5 % 0.4 %/ 0.34 % life mil-std-202, 108 at 125 c, 1000 h 0.5 %/ 0.1 % 0.3 %/ 0.08 % mechanical shock mil-std-202, 213, condition c 0.25 %/ 0.1 % 0.03 %/ 0.018 % vibration mil-std-204, 10 hz to 2 khz 0.25 %/ 0.1 % 0.02 %/ 0.047 % resistance to soldering heat mil-std-202, 210, condition b 0.25 %/ 0.1 % 0.13 %/ 0.24 % electrostatic discharge aec-q200-002 at 500 v human body 0.50 % 0.25 %/ 0.01 % aec-q200-002 at 1000 v human body 0.50 % solderability j-std-002 method b and b1 visual visual terminal strength aec-q200-006 at 1 kg for 60 s 0.25 %/ 0.1 % 0.02 %/ 0.018 % flame retardance aec-q200-001 para 4.0 visual visual
mpma (divider) www.vishay.com vishay thin film revision: 03-dec-12 3 document number: 60113 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) preferred packaging code global part number information new global part nu mbering: mpma1003aws global model (3 or 4 digits) resistance (4 or 8 digits) tolerance and ratio tolerance packaging mpma ni/pd/au = e4 termination first 3 digits are significant figures and the last digi t specifies the number of zeros to follow. when like values are required use total resistance. when dual values are required list both values. example: (list r 1 first in part number with dual values) 1002 = 10k (5k/5k) 1003 = 100k (50k/50k) 10011002 = 1k/10k divider abs. tol. a = 0.1 % b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % tape and reel t1 = 1000 min., 1000 mult (1) t5 = 500 min., 500 mult tf = full reel 4000 tp = 100 min., 1 mult (package unit si ngle lot date code) ts = 100 min., 1 mult pm 1001 m 01t a 5 0a1 pm 100 m t a 3 a1
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
